Spin Generation

The question was asked by Andrew Rice on social media and I put it up as a pole. What plays the bigger role in generating spin between the grooves and flat spot between the grooves?

When looking at spin the biggest factor is friction. That means how clean of contact there is between the wedge face and golf ball. Although spinloft matters we are just talking about what effects the spin more: face or grooves.

groove-rule-1.jpg

Chatting with PING engineers they created a wedge with no grooves on it.  Their conclusion is that a flat wedge spins just as much as a new wedge with grooves in a dry controlled environment.  Andrew Rice had access to the wedge and hit a few shots and put the findings HERE.

Let’s take a look in a different area: Racing.  When the track is dry they use race slicks in order to get the most grip on the road.  When it starts to rain they switch tires to the tread in order to channel the moisture and get better tire to track grip.  That is where the grooves come into play on the wedge.  They help channel the debris (moisture, grass, etc) away from the surface so there can be better ball to club face interaction.

IMG_6516.JPG

When reading through USGA Equipment Rules there are parameters on area roughness and grooves for a wedge.  My Golf Spy Article summed it up nicely with this quote “In simple terms, square grooves would have to be further apart than ‘v’ grooves because they can channel away more grass and moisture.”  The roughness also helps channel some moisture so there is a limit on the face milling.  The last area of grooves that are regulated is the sharpness of the edges.  There needs to be a minimum of a 0.010″ radius.  This rule is due to the sharpness of the top edge in the role of generating spin.

Screen Shot 2019-12-09 at 9.56.49 AM.png

Conclusion is that in a lab where you can guarantee there will be no debris/moisture getting between the face and the ball then the flat surface between creates the most friction.  As golfers we all play on a golf course where the situations are always changing from morning dew to grass heights.  Even on a tight lie there still is a little grass that gets trapped between the face and the ball.  The grooves are there in order to help move the debris away form the contact spot.  The sharpness of the upper groove edge will help reduce the slippage as the ball works up the face resulting in a little more spin.

42BA2593-3A21-46D3-B0BC-A1C15178B165.JPG

SO if you are looking to create maximum spin make sure your lie is dry, tight, and you are using a new wedge and premium golf ball.  Take a look at a warn wedge compared to a new wedge below.  You can see how smooth the surface is which would result in more friction and also how sharp the grooves are in order for the upper edge to add a little additional grip.

Screen Shot 2019-12-09 at 9.56.08 AM.png

One last note is that companies are starting to come out with new finishes and coatings.  This helps the moisture move off the face faster like a fresh wax on your cars paint.  PING released their Glide 3.0 wedge with Hydropearl and tests are coming out with significant results. See image below from TXG’s  Moisture Test Video

Screen Shot 2019-12-09 at 10.19.55 AM.png

Do yourself a favor and go test your current wedge.  See your local PGA pro and do a spin test.  Check your wedges compared to a new wedge.  First hit 3-4 balls off a small tee with your current wedge and the new wedge to guarantee a clean strike between face and ball.  Next repeat the same process and add a little moisture to the ball and the club face.  Finally hit a few off the turf.  The numbers should speak for themselves.  I like to replace my most used wedge once a year due to practice and play with the other wedges being replaced every 2-3 years.  Depending on your playing and practice habits that might change for you.

Backswing Drill: Medicine Ball

Would like to share with you a good drill for the backswing.  This uses a medicine ball or weighted object to give you the feeling of what the body should be doing to move the weight or club back and through in a golf swing.  For the YouTube video link Click Here.

Step 1:  Put the weighted object in front of you with bent arms.  4-8 pounds is all you need.  The weight is there to give you a sensation not a workout.

Screen Shot 2019-03-16 at 4.22.30 PM.png

Step 2:  Turn the weight into your backswing.  As you can see I kept the weight in front of the chest and kept the arms in very similar positions as they were at setup.  It was moved back with the body.

Screen Shot 2019-03-16 at 4.22.21 PM.png

We do not want to see the hips sliding over the rail foot like below.  As you can see that just moves the weight side to side instead of in a circle.  Could do this with the body and pull my right elbow back but remember arms are trying to stay in the same position as setup.

Screen Shot 2019-03-16 at 4.22.43 PM.png

Step 3: From the backswing position rotate onto the lead foot and support the weight out in front of the body.  You will learn how to push the hips forward and keep the chest back to counter balance the weight as it is out in front of the lead foot.  Also notice the trail toe is in the ground and you can see the bottom of the shoe from down the line.

Screen Shot 2019-03-16 at 4.22.51 PM.png

This can also be done with a club out in front of you but will not give the weighted feel but can give you the rotation feel.  Also notice that I kept my right and left hands the same distance away from my shoulders.  In the backswing the shaft is tilted with the shoulders and the grip is pointing down to the ground.

Screen Shot 2019-03-16 at 4.23.18 PM.png

Screen Shot 2019-03-16 at 4.23.33 PM.png

Screen Shot 2019-03-16 at 4.23.36 PM.png